Confused between CASE 770 EX MagnumandJCB 3DX ? Wondering whether you should spend that hard earned money on CASE 770 EX MagnumandJCB 3DX? Don't Worry! We are here to help you choose between these two models. Talking about CASE 770 EX Magnum, it has been priced at Rs . On the other hand, JCB 3DX will cost you more than CASE 770 EX Magnum.JCB 3DX comes with a price tag of Rs ₹35.00 Lakh.
Check the detailed comparison for the models below on the basis of features, comfort, power, transmission, suspension and more.
Key Highlights | CASE 770 EX Magnum | JCB 3DX |
---|---|---|
EX-Showroom Price | Price coming soon | ₹35.00 Lakh |
Base
Price coming soon
Base
₹35.00 Lakh
Model | |
FPT S8000 | JCB 448 |
Compliant | |
BS-III | NA |
Displacement | |
3900 | 4.8 |
Air Intake Type | |
Turbocharged | NA |
Gross Power | |
86 hp | 36 kW (49 hp) @ 2000 RPM |
Maximum Torque | |
402 NM | 240 Nm |
Dump Height | |
2732 | 2740 MM |
Load Over Height | |
3275 | 3320 MM |
Hinge Pin Height | |
3580 | 3540 |
Hinge Pin Forward Reach | |
NA | 250 |
Reach At Ground | |
1486 | 1420 |
Max Reach At Full Height | |
NA | 1150 MM |
Max Reach At Full Height Bucket Dumped | |
2375 | 780 |
Below Ground Level Dig Depth | |
106 | 70 |
Rollback At Ground | |
NA | 45 deg |
Dump Angle | |
45 Deg | 38 |
Bucket Capacity Std | |
1.1 | 1.1 |
Bucket Breakout Force | |
NA | 5700 kgf |
Loader Arm Breakout Force | |
NA | 5300 kgf |
Max Pay Load | |
1760 | 1800 |
Maximum Lifting Capacity | |
3700 | 1490 |
Max Dig Depth | |
4547 | 4770 MM |
Reach Ground Level To Swing Center | |
5753 | 5440 |
Reach Ground Level To Rear Wheel Center | |
NA | 6720 |
Reach At Full Height To Slew Center | |
NA | 2740 |
Max Working Height | |
5593 | 5970 |
Max Load Over Height | |
3774 | 4180 |
Bucket Capacity | |
0.3 | 1.26 |
Bucket Capacity Backhoe | |
0.3 | 1.2 |
Bucket Rotation | |
204 Degree | 185 deg |
Bucket Breakout Force | |
4535/5630 Kgf | NA |
Dipper Tear Out Force | |
3250/4300 Kgf | 3010 Kgf |
Max Lift Capacity | |
1470 Kg | 1490 Kg |
Safe Working Load | |
1100 kg | NA |
Max Operating Weight | |
7711 | 7510 |
Transport Length | |
2300 | 5900 |
Width Over Bucket | |
2300 MM | 2350 MM |
Track Width Rear | |
NA | 1730 MM |
Track Width Front | |
NA | 1860 MM |
Wheelbase | |
2230 | 2170 MM |
Minimum Ground Clearance | |
400 MM | 310 MM |
Height To Top Of Cabin | |
NA | 2870 MM |
Overall Transport Height | |
3840 | NA |
Pump Type | |
Gear pump | NA |
Pump Flow | |
123 lpm | 114 lpm |
Engine Oil | |
9.1 | 15 |
Rear Axle | |
17 Ltr. | 20 Ltr |
Hydraulic Oil Replacement | |
NA | 92 Ltr |
Fuel Tank | |
129 L | 128 Ltr |
Coolant | |
20 Ltr. | 16.5 Ltr |
Hydraulic Oil | |
110 | 110 |
Transmission Oil Capacity | |
22 Ltr. | 17.5 Ltr |
Rear | |
Rigid axle with CARRARO 28.32M (2WD/4WD) | Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short prop shaft from gear box |
Front | |
CNH PS1300 (2WD), Carraro 26.17 (4WD) | Steer axle, centrally pivoted, with oscillation angle of 16 |
Front Oscillation | |
21 Degree (2WD), 16 Degree (4WD) | NA |
Type | |
Power Steering | Power track steering |
Unit Displacement | |
125 CC | NA |
Turning Circle Diameter Outside Bucket | |
NA | 11600 |
Turning Circle Diameter Outside Bucket Not Braked | |
NA | 8640 |
Pressure | |
140 Bar | 160 bar |
Service | |
Wet multi-discs | JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated |
Parking | |
Manual, with lever | Hand operated, disc brakes on rear axle input disc. |
Hd Rear Optional | |
14x25 - 20 PR | NA |
Standard Front | |
9.0x16 - 16 PR | 9 x 16 - 16 PR |
Standard Rear | |
16.9x28 - 12 PR | 16.9 x 28 - 12 PR |
Battery | |
12 V, 130 Ah | NA |
Transmission Make And Model | |
CARRARO 4WD TLB1 | NA |
Powertrain Type | |
4 forward and 4 reverse travel speeds with power Shuttle | NA |
Category | |
Backhoe Loader | Backhoe Loader |
Forward | |
6.2/10/20.7/39.2 | NA |
Reverse | |
7.4/12/Not Recommended | NA |