Confused between CASE 770NXeandJCB 3DX Xtra ? Wondering whether you should spend that hard earned money on CASE 770NXeandJCB 3DX Xtra? Don't Worry! We are here to help you choose between these two models. Talking about CASE 770NXe, it has been priced at Rs ₹28.00 Lakh. On the other hand, JCB 3DX Xtra will cost you more than CASE 770NXe.JCB 3DX Xtra comes with a price tag of Rs ₹32.00 Lakh.
Check the detailed comparison for the models below on the basis of features, comfort, power, transmission, suspension and more.
Key Highlights | CASE 770NXe | JCB 3DX Xtra |
---|---|---|
EX-Showroom Price | ₹28.00 Lakh | ₹32.00 Lakh |
Base
₹28.00 Lakh
Base
₹32.00 Lakh
Model | |
S8000 | JCB 444,CRDI |
Compliant | |
BS-III | CEV Stage lV |
Displacement | |
3900 | 4.4 |
Air Intake Type | |
Water Cooled | NA |
Gross Power | |
49.5 hp | 55kW (74hp) @ 2200 rpm |
Maximum Torque | |
252.2 | 400 Nm |
Dump Height | |
2720 | 2930 MM |
Load Over Height | |
3300 MM | 3370 |
Hinge Pin Height | |
3580 | 3640 |
Hinge Pin Forward Reach | |
240 MM | 410 MM |
Reach At Ground | |
1980 MM | 1600 MM |
Max Reach At Full Height Bucket Dumped | |
1190 | 1240 |
Below Ground Level Dig Depth | |
110 MM | 120 MM |
Rollback At Ground | |
33 Deg. | 43 Deg |
Dump Angle | |
45 Deg | 41 Deg |
Bucket Capacity Std | |
1.1 | 1 Cum |
Bucket Breakout Force | |
5275/51.73 (kgf/kN) | 6264 kgf |
Loader Arm Breakout Force | |
5110/50.11 (kgf/kN) | 5516 kgf |
Max Pay Load | |
1925 kg | 1800 |
Maximum Lifting Capacity | |
3425 | NA |
Dipper Configuration | |
14 Feet | NA |
Max Dig Depth | |
4400 mm | 5050 mm |
Reach Ground Level To Swing Center | |
5630 | NA |
Reach Ground Level To Rear Wheel Center | |
6950 | NA |
Reach At Full Height To Slew Center | |
2150 | NA |
Max Working Height | |
5490 | 6010 MM |
Max Load Over Height | |
3640 | 4350 MM |
Bucket Capacity | |
0.26 | 0.3 |
Bucket Capacity Backhoe | |
0.26 | NA |
Bucket Rotation | |
185 Degree | 185 deg |
Bucket Breakout Force | |
5000/49.03 (kgf/kN) | 6324 kgf |
Dipper Tear Out Force | |
2751/26.98 (kgf/kN) | NA |
Max Lift Capacity | |
1417 Kg | 1584 |
Safe Working Load | |
1300 kg | NA |
Max Operating Weight | |
7610 | 7630 |
Transport Length | |
5880 | 6100 |
Width Over Stabilizer | |
2270 MM | NA |
Width Over Bucket | |
2280 MM | 2350 MM |
Track Width Rear | |
1700 MM | 1730 MM |
Track Width Front | |
1880 MM | 1860 MM |
Wheelbase | |
2180 MM | 2170 MM |
Minimum Ground Clearance | |
380 MM | 310 MM |
Height To Top Of Cabin | |
2880 | 2870 MM |
Overall Transport Height | |
3850 | 3900 |
Pump Type | |
Axial Piston with Electric Displacement Cntrol | NA |
Pump Flow | |
119 lpm | 148 lpm |
Type | |
Open Centre Load Sensing system | NA |
Relief Pressure | |
240 Bar | NA |
Engine Oil | |
8.6 | 15 |
Rear Axle | |
17.1 Ltr. | 20 Ltr |
Hydraulic Oil Replacement | |
48/4000 hr. | NA |
Fuel Tank | |
129 L | 128 Ltr |
Coolant | |
20 Ltr. | 20.5 Ltr |
Hydraulic Oil | |
100 | 92 |
Transmission Oil Capacity | |
18 Ltr. | 17.5 Ltr |
Rear | |
CARRARO 28.32M | Drive axle rigidly mounted, incorporates JCB Max-Trac torque proportioning differential, driven by short propshaft from gear box. |
Front | |
CNH PS1300 (2WD) | Steer axle, centrally pivoted, with oscillation angle of 16º |
Front Oscillation | |
±21 degree(2WD) | NA |
Type | |
Power Steering | Power track steering |
Unit Displacement | |
125 CC | NA |
Turning Circle Diameter Outside Bucket | |
4.6 | NA |
Turning Circle Diameter Outside Bucket Not Braked | |
5.55 | NA |
Pressure | |
140 Bar | 2320 p.s.i. (160 bar) |
Service | |
Hydraulic foot operated, 2 disc per side | JCB ‘Q’ brakes, hydraulically actuated, dual line, self adjusting (compensated), oil immersed, multi-disc type on the rear axle, well protected from dirt, water etc. requiring no maintenance. Operated |
Parking | |
Mechanically actuated caliper type brake pack on rear axle input shaft | Hand operated, disc brakes on rear axle input disc |
Hd Rear Optional | |
14x25- 12PR | NA |
Standard Front | |
9x16 -16PR | 9 x 16 - 16 PR |
Standard Rear | |
16.9x28 -12PR | 16.9 x 28-12 PR |
Battery | |
12 volts, 110 Ah | NA |
Transmission Make And Model | |
CARRARO 2WD TLB1 | NA |
Powertrain Type | |
4F-4R Shuttle Synchromesh Transmission | NA |
Category | |
Backhoe Loader | Backhoe Loader |
Forward | |
5.0/7.9/16.9/32.4 | NA |
Reverse | |
5.9/9.4/19.8/NR | NA |